Hi Chive!

The "Use layer mask bounds instead of whitespace trimmed bounds" feature has been implemented, but we've decided to activate it using the tag [trim:mask]. So essentially, for the trim tag, we have the following options:

• [trim], or [trim:true], or [trim:ws]: trims at whitespaces
• [trim:false], or [trim:canvas]: trims at canvas
• [trim:mask]: trims at the layer mask

However, I've just noticed that currently it doesn't seem to work as expected

To ensure we're on the same page, could you show me an example of your layers structure and explain the behavior you're expecting?

Thank you Davide!

the structure's something like this!

and then I exported PSD from ClipStudioPaint, tested exporting with:
①Photoshop script(Photoshop CC2024)
②Spine PSD import of 4.2.61-beta.
(both are set padding=0)

the results are: ①trimmed as intended, using masks as bound, ②whitespace trimmed with 0 padding.
And then I tested exporting without [merge]tag and layer groups, as individual layers with masks, got the same result from ②.

I didn't know about [trim:mask] tag! thank you for the info. I assumed it'd automatically work as it's been like that as the photoshop plugin.
I tested again with [trim:mask] tag, but as you said it doesn't seem to work. it's resulted with whitespace trimming.

Thank you for looking into this!

The mask value for the trim tag is new, and since we're currently in the process of writing the documentation, you couldn't have known that

In any case, thanks for pointing this out; it helped us discover a bug!
I'll let you know as soon as we fix this.

Thanks! I'll look forward to it!

chive

We realized that the [trim:mask] tag was working only on layers.
We just implemented this feature also for groups.
You'll be able to use it in the next beta release (4.2.62-beta) that will probably be ready tomorrow!
Let us know then if it works as expected

It seems that the adjustment layer does not work. I've tried it with clip studio paint and affinity photo.

Bloss0mx

Adjustment layers are not supported yet, and since it will be complex and time-consuming to implement them, I'm sorry to say that it won't happen soon
If you really need them, you can still use the Photoshop to Spine script.

May I ask you which Adjustment layers you use more frequently? Since there are a lot, it might be helpful to define a priority among them.

Davide I'm using brightness / contrast adjustment layer, hsl shift adjustment layer and curves adjustment layer in clip studio paint and affinity photo.

I dont get how to making linked mesh working.

The logical things for me is to prepend the skin like:

but

So i understand it search inside the slot.
Let's check what skinName i need to put here

OK the skinName seem to be small-colorable.
let's try

Humm

So i thinks i need to input the full path name after the skinName
Let's try.

Hummm
why it thinks source mesh is "small-colorable".
Hoow you dont input the skinPlaceHolder.
Give it a shot.

What im doing wrong ?
i've tried with blank file without big lenght of skinname it's doesnt work.
Thanks for watching this demonstration for how to not work with linked mesh

TRY 1 =
at s.bqM._(_:197)
at s.kPv._(_:408)
at s.ePX.B(_:303)
at s.ePX._(_:294)
at s.JjN._(_:313)
at s.Ipp.run(_:247)
<events>
Cause: s.BBp: Parent mesh not found: SCARF
at s.GLq._(_:395)
at s.NAy._(_:118)
at s.bqM._(_:168) ...

Can't get it working

Thanks for any help ..

Cant upload psd here, and sended the mail, response was to post here.

https://mega.nz/file/0uIkxaaJ#kvLKa-ofNWqiqI9FUr6tfwa8tGRjK5qCQ81tDIRBhRs

valahaha
Hi valahaha, I'm sorry you had so much trouble making the linked mesh work.

You actually helped us in finding another bug
The target source mesh detection is currently failing when the linked mesh tag value depth is higher than 2, where the depth is the number of parts separated by "/" in the tag value. We have fixed this problem and you will find the fix in the next beta release.

In general, the syntax for the linked mesh tag value is:

The linked mesh tag value must be the full attachment name of the source mesh, as it is in Spine. That's the only way to indicate uniquely the desired source mesh.
Moreover, the linked mesh must be in the same slot as the desired source mesh. This implies the usage of the [slot] tag somewhere to make the source and linked mesh be in the same slot.

In your example, you have two SCARF[slot] folders, and one of them is ignored, so I suppose you want to focus on the folder with skins. In order to make the small-colorable scarf the source mesh of the small-green scarf, you need to add:

• [mesh] to the small-colorable scarf
• [mesh:equipment/neck/scarf/small-colorable/scarf] to the small-green scarf because equipment/neck/scarf/small-colorable/scarf is the attachment name of the source mesh.

Davide DAMN i love you, spine team, we always got our back covered that insane !

Thanks for all !

valahaha

Thank you for your appreciation!

4.2.64-beta has been released with the aforementioned fix.
However, we had an internal discussion and decided to simplify how the source mesh can be indicated for a linked mesh.

As long as there is no ambiguity, you can now specify only the ending part of the attachment name of your source mesh.
In your example, you have in the SCARF slot the following attachments:

• equipment/neck/scarf/small-colorable/scarf
• equipment/neck/scarf/small-green/scarf

You can now just add [mesh:scarf] since there's no ambiguity in which attachment you want to select (the linked mesh itself is excluded from the research).

If you had another scarf in your slot, for example:

• equipment/neck/scarf/small-colorable/scarf
• equipment/neck/scarf/small-green/scarf
• equipment/neck/scarf/small-red/scarf

You would need to add [mesh:small-colorable/scarf] because there would be ambiguity with the small-red/scarf attachment.
But it's definitely more concise than writing the entire equipment/neck/scarf/small-colorable/scarf attachment name.
In the case you write an ambiguous attachment name for the source mesh, an error dialog will list the candidate meshes and ask you to be more specific.

This will be available in the next beta release.

Is there progress on setting an origin point for PSD imports? It would be really nice to have since every export I do depends on it.

Nate Is the origin tag currently functional? I was hoping that there's eventually a way to set the origin without using the Photoshop program entirely, since there's currently no specific method in Clip Studio Paint. Alternatively, I can move my exports appropriately and save the Translate coordinate of the new root bone.

Nate The guide CSP has is a completely different element, so it cannot be used the same way as Photoshop guides.